12x28x8mm Steel Bearing K603406001 for Zenoah G200,G231,G240,G260,G270,G290  [K603406001]

ZENOAH BEARING 12X28X8MM G200,G231,G240,G260,G270,G290 #603406001 (W/O PACKING)
Price:
£4.77
Brand:
Zenoah
Model:
K603406001
Condition:
Brand New
Write a review

Precision 12x28x8mm Bearing for Zenoah G-Series

The Zenoah K603406001 is a precision 12x28x8mm steel ball bearing intended for small RC engine rotating assemblies. It is compatible with the G200, G231, G240, G260, G270 and G290 engines named in the product title and replaces worn bearings to restore consistent rotational performance.

Practical fitting advice: remove the old bearing without disturbing nearby seals or bearings, use even pressure on the outer race to install the new unit, and ensure the shaft and housing are free from burrs. Light lubrication on the rolling elements can be applied sparingly to improve initial run-in.

Maintenance benefits: renewing a fatigued 12x28x8mm bearing curbs excess friction and heat, helping to prevent accelerated wear of adjacent components and maintaining predictable engine behavior under load.

How do I confirm this is the correct replacement bearing?

Measure the old bearing or consult the engine parts list to confirm a 12x28x8mm specification. The K603406001 is intended for the G-series models listed but always verify the existing part size before ordering.

What signs indicate the bearing needs replacement?

Symptoms include increased noise, rough rotation by hand, axial play, or overheating in operation. Any of these suggest the bearing has lost smoothness and should be replaced with a new K603406001.

Can I re-lubricate this bearing to extend life instead of replacing it?

Light re-lubrication can help a little, but it will not fix pitting or wear. For bearings showing mechanical wear or play, replacement with a new 12x28x8mm unit is the reliable solution.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved