1/32 Mini 4WD Pink 4mm Hex Post Set M4WD-02/PK for chassis upgrades by 3Racing  [M4WD-02/PK]

M4WD-02/PK pink 4mm hex mounting posts for Mini 4WD

A pink 4mm hex post set designed as replacement hardware or matching trim for Mini 4WD models using a 4mm hex mounting system. This description concentrates on compatibility, fitting notes, and upkeep rather than specifying material properties.

Compatibility is determined by the common 4mm hex post interface used across many Tamiya Mini 4WD chassis. These posts suit chassis and accessories that accept 4mm hex standoffs, including a range of Super-II and later performance platforms. Verify both thread size and post length against your chassis before fitting.

Fitting advice: keep thread engagement uniform and avoid over-tightening to prevent thread damage. Where posts secure rollers or body mounts, recheck roller and wheel clearance after installation to confirm unobstructed movement. Match visible post finish to adjacent hardware on display models for a consistent look.

Preservation: inspect posts periodically for loosening and any corrosion when exposed to damp conditions. Tighten to a secure hand-firm setting and only use thread-locking compounds if you accept less convenient future disassembly.