13mm Rear Shock Spring Orange 1.9lbs Serpent 500912  [SER500912]

Price:
£0.00
Brand:
Serpent
Model:
SER500912
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Enhance Rear Handling

The Serpent 500912 rear shock spring is an orange 13mm spring rated at 1.9lbs, offered as a direct replacement to modify rear support and rebound characteristics. It allows adjustments to handling balance without the need to replace shock bodies or mounts.

Fitting is performed on common threaded-piston or cup-style rear shocks by removing the end caps, sliding off the old spring and lower retainer, fitting the Serpent 500912 spring, then setting preload and rebound to suit. Standard RC maintenance tools are sufficient for the job.

From a setup perspective, the firmer 1.9lbs rate increases rear support and can quicken rebound versus softer springs, which may alter oversteer/understeer tendencies; always test changes incrementally and adjust shock oil and preload in combination.

Spring rate is the force required to compress the spring by a set distance; the 1.9lbs rating provides a reference for stiffness when comparing springs.
This spring is made for shocks that accept 13mm inner-diameter springs. Check your shock’s spring seat diameter and retainer to confirm compatibility before installation.
You should notice handling changes immediately, but optimal balance requires tuning rebound, preload, and oil viscosity in small steps while comparing results.
The orange colour is primarily for visual identification; the performance comes from the spring dimensions and rated stiffness.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved