3-Blade 5x3 Reverse/Pusher Propeller MA0530TEP for Small Electric RC Models by Master Airscrew  [MA0530TEP]

Pusher Installation Guide

The Master Airscrew MA0530TEP is a 5x3, three-blade propeller intended for reverse or pusher configurations on small electric RC models. Its three-blade layout changes how the prop interacts with the slipstream compared with two-blade designs, so expect a different thrust profile and sound when mounted behind the motor.

Before fitting, confirm the correct motor rotation and propeller orientation for a reverse/pusher setup; use a compatible adapter or hub and secure the prop to the shaft with the proper retaining hardware. Check that the propeller clears the airframe and control linkages at full travel to avoid contact during operation.

Balance the MA0530TEP on a prop balancer and inspect blades after any hard landing for nicks or distortion. A balanced prop lowers vibration passed to the motor, ESC, and airframe, which helps preserve component life and keeps handling predictable. Make small tuning adjustments and record outcomes since modest changes in blade condition or alignment can significantly affect handling and cruise behavior.