3Racing AWD-18/F0/SI Kyosho Mini-Z AWD Front 5-Spoke Rim 0 Offset  [AWD-18/F0/SI]

Kyosho Mini-Z AWD Front 5 Spoke Rim (0 Offset) - 3RACING AWD-18/F0/SI
Price:
£3.49
Brand:
3Racing
Model:
AWD-18/F0/SI
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Mini-Z AWD Front 5-Spoke Rim Overview

Built as a direct replacement front rim for Kyosho Mini-Z AWD platforms, this five-spoke wheel is sold under the part code AWD-18/F0/SI. The 0 offset indicates the rim mounting face is close to the hub plane, which changes track width and lateral clearance when adjusting the car for different track conditions.

Installation follows normal Mini-Z procedures: remove the original wheel, install the rim onto the stock wheel hex or adapter, check fitment at the hub, then refit the tyre and secure the assembly. No special adapters are required beyond the Mini-Z AWD wheel mounting system.

Using a 0 offset front rim provides a neutral wheel stance, which is useful when you want to test tyre or suspension adjustments without introducing lateral changes to the wheel position, giving more consistent steering feedback.

Will this rim change front track width?

A 0 offset places the wheel near the hub centreline, so any track width change is minimal compared with positive or negative offset rims; final track depends on your wheel and tyre selection.

Is glueing tyres affected by rim design?

Glueing technique remains the same; ensure the tyre seats evenly on the rim and that the rim mounts flush to the hub before glueing for consistent balance and grip.

Should I check suspension after swapping rims?

Yes, after fitting any new rim check ride height and steering trims to confirm handling remains as expected, then perform a brief test run to verify behaviour on your chosen surface.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved