TA05 SSG Graphite Front Bumper Stiffener TA05-01/SG for Tamiya by 3Racing  [TA05-01/SG]

Tamiya TA05 SSG Graphite Front Bumper Stiffener - 3Racing TA05-01/SG
Price:
£11.12
Brand:
3Racing
Model:
TA05-01/SG
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Graphite bumper reinforcement

This graphite front bumper stiffener is specified for the Tamiya TA05 SSG chassis and is provided as part number TA05-01/SG. It reinforces the front bumper zone to modify how the chassis reacts without touching suspension geometry.

The stiffener is aimed at chassis setup work: by reducing local flex the front end can turn in more predictably and resist deformation during impacts. It is a one-piece graphite unit that fastens to the original bumper mounts on the TA05 SSG chassis and is compatible only with that model.

Installation is simple with common RC tools: remove the stock bumper support, align the stiffener to the original holes, and secure using the supplied or stock hardware. You do not need to swap motor or suspension parts to fit this item, however final handling will vary with tyre choice and damper setup.

Can this stiffener be used on other TA05 trims?

This product is intended for the TA05 SSG chassis code; other TA05 trims may not share the same bumper mount layout so verify before purchasing.

Will it affect crash durability?

The stiffener reduces bumper flex and can lower visible damage from minor impacts, but severe crashes may still cause harm to the bumper or chassis.

Recommended tuning after fitting?

After fitting, fine-tune tyre pressures and front damper settings to achieve a balanced feel, as the car will likely show a firmer front response.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved