3S LiPo 5200mAh Battery Arrowmax am-700601 with Deans Connector  [am-700601]

Arrowmax AM Lipo 5200mAh 3S - 11.1V 55C Continuous 110C Burst wire with Deans
Price:
£0.00
Brand:
Arrowmax
Model:
am-700601
Write a review

What the Arrowmax am-700601 delivers

The Arrowmax am-700601 is a 3-cell LiPo battery intended for electric RC models. It blends 5200mAh capacity with Deans plug termination and defined discharge ratings to sustain the high-current requirements of brushless motors and modern ESCs.

Fitting advice: secure the cell with straps or foam to prevent movement, route the balance lead neatly and check the Deans connector sits clear of any sharp chassis features. Ensure wiring cannot be pinched when reinstalling bodywork.

Setup notes: capacity determines runtime and influences the vehicle's balance, while C-rating affects voltage stability during heavy throttle. Test packs by keeping connector and cell count consistent, then alter mAh or C-rating to dial in runtime versus instantaneous power without changing gearing or ESC mapping.

Care instructions: store at recommended storage voltage, visually check the pouch and leads before use, and charge using a LiPo-compatible balance charger in a safe container. Remove from service if there is swelling, seam splits, or wire damage.

For drivers seeking a robust 5200mAh 3S option with Deans termination and dependable discharge figures, the Arrowmax am-700601 provides straightforward, reliable power for a wide range of RC applications.

After a balance charge, measure each cell with the charger or a cell checker; voltages should be within a few hundredths of a volt of each other.
The 5200mAh capacity offers extended run times compared with smaller packs, but total endurance depends on motor, gearing and driving style. Balance capacity needs against added weight.
Look for noticeable pouch swelling, split seams, exposed or frayed wiring, or a large drop in capacity and performance; any of these means retire the pack.
Fast charging is possible if the pack's chemistry and manufacturer limits permit it; ensure the charger supports a safe balance charge profile and adhere to recommended charge currents to avoid stress.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved