56SR Cylinder Head Replacement Gasket YSS2003 for RC Engines by YS Engine  [YSS2003]

YS ENGINE CYLINDER HEAD GASKET 56SR #S2003
Price:
£2.40
Brand:
YS Engine
Model:
YSS2003
GTIN:
4560105741728
Condition:
Brand New
Write a review

Role and Care of the 56SR Head Gasket

The YS Engine YSS2003 cylinder head gasket is an aftermarket replacement compatible with 56SR series engines. It seals the joint between the cylinder head and cylinder to help preserve compression and prevent combustion gas leakage during rebuilds or routine servicing.

For fitting, ensure mating surfaces are clean, lay the gasket flat, align the head correctly, and tighten the head screws progressively in a crisscross pattern to avoid distortion. Do not overtighten; refer to your engine manual for torque guidance where available.

Change the gasket whenever the head is removed, if you detect compression loss, or if visible damage appears. Using the correct gasket keeps compression stable and supports consistent tuning outcomes.

Will this gasket suit modified or upgraded 56SR setups?

The gasket is designed for the 56SR series as specified; if your engine has altered components check clearances and bolt positions before fitting to ensure compatibility.

What should I inspect before reassembling the head?

Examine both head and cylinder faces for burrs, residue, or unevenness; ensure the gasket seats flat and the bolt holes align prior to tightening.

Is additional sealant necessary with this gasket?

Generally no extra sealant is needed if surfaces are clean and undamaged. Use sealants only if recommended by service documentation or if defects require it.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved