63T M1.0 Spur Gear CRXXL063TS for CROSSRC EMO Trail Use by GPM  [CRXXL063TS]

CROSSRC EMO 40CR Steel Main Gear 63T (M1.0) - GPM CRXXL063TS
Price:
£12.56
Brand:
GPM
Model:
CRXXL063TS
GTIN:
4894538412277
Condition:
Brand New
Write a review

Hardened 63T M1.0 spur tailored for EMO platforms

This 63-tooth main gear is manufactured from hardened 40Cr steel and matches the metric 1.0 pitch used across EMO 1/5 and 1/6 chassis. The black hardened finish and robust steel construction aim to extend service life in scale driving conditions.

Prior to running confirm the motor pinion is M1.0, set a correct gear mesh and check bearing alignment. Proper mesh and straight shafts help cut noise and prevent uneven wear. Handle hardened steel parts carefully during installation to avoid creating burrs.

Packing includes

  • Main Gear 63T M1.0 - 1pcs

Compatible Models

  • CROSSRC 1/6 EMO XXL 6X6
  • CROSSRC 1/6 EMO XX 4X4
  • CROSSRC 1/5 EMO XX2 4X4
  • CROSSRC 1/5 EMO XXL2 6X6

A reliable 63T M1.0 replacement for EMO gearboxes, offering a balance of strength and steady engagement suited to scale trail and heavier duty runs.

How do I confirm pinion compatibility?

Check the pinion tooth pitch marking or measure the pitch; the spur requires a metric 1.0 pitch pinion to mesh correctly.

What causes premature wear?

Incorrect mesh, misaligned shafts or contaminated bearings accelerate wear; correct these during setup to extend gear life.

Can I reuse the factory gear if undamaged?

Yes, if the original shows minimal wear you can retain it, but this hardened 40Cr option offers improved resistance for heavier use.

Is special lubrication required?

Use a standard gearbox-safe grease on bearings and a light film where recommended, avoiding excess that can attract grit.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved