720S GT3 Style 3D Rear Wing for Mini-Z MR-04 - Kyosho MZN-W01LW  [KY-MZN-W01LW]

Kyosho MZN-W01LW - 3D Rear Wing for 720S GT3 (Light Weight)
Price:
£11.46
Brand:
Kyosho
Model:
KY-MZN-W01LW
GTIN:
4548565518500
Condition:
Brand New
Quantity Discount
Unit Price You Save
2 £9.25 each £4.44 or 19%
3+ £8.79 each £8.03 or 23%
Write a review
alt="Kyosho MZN-W01LW - 3D Rear Wing for 720S GT3 (Light Weight)" title="Kyosho MZN-W01LW - 3D Rear Wing for 720S GT3 (Light Weight)"
alt="Kyosho MZN-W01LW - 3D Rear Wing for 720S GT3 (Light Weight)" title="Kyosho MZN-W01LW - 3D Rear Wing for 720S GT3 (Light Weight)"

3D rear wing designed for Mini-Z 720S GT3 replicas

The Kyosho MZN-W01LW 3D rear wing serves as an RC-scale aerodynamic accessory for Mini-Z GT3-style shells inspired by the 720S GT3 lines. Its lightweight, contoured form is intended to modify airflow at model speeds while remaining a scale body part rather than a full-size component.

Compatibility and fitment: crafted for Mini-Z bodies modelled on the 720S GT3 and compatible with MR-04 chassis that accept common rear wing mount standards. Measure your body's post spacing and mount points before fitting to ensure correct alignment.

Installation notes: use the original Kyosho mounting points or light M3 hardware, tighten carefully to avoid cracking the thin tabs, and check that the wing clears the body and tyre through suspension travel and chassis flex.

Tuning role: the wing is an adjustable element for rear grip and transient handling; small, deliberate changes to angle or height will alter rotation and stability—validate each tweak with controlled test runs.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Does this wing fit all MR-04 body shells?

The wing fits Mini-Z shells styled after the 720S GT3 that use standard rear wing mounts on MR-04 variants. Some shells may require minor trimming or custom spacer plates to match post spacing exactly.

Which fasteners are recommended for a secure fit?

Use light M3 screws or the original Kyosho hardware and consider small nylon or metal washers to spread the load across the mounting tab. Hand-tighten to avoid over-stressing the plastic.

Can I adjust the wing quickly between sessions?

Yes. Because changes are small and reversible, you can swap angles or add spacers between runs to compare handling. Keep a log of settings so you can return to configurations that improved lap time.

Will the wing affect tyre wear?

Increased rear downforce can shift load distribution and influence tyre scrub in corners, which may accelerate wear in some setups. Monitor tyre condition when making significant aerodynamic changes.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved