Aftermarket Graphite Upper Deck for Mini-Z MR-015 KZ-01B/WO by 3Racing  [KZ-01B/WO]

Kyosho Mini-Z MR-015 Optional Replacement Graphite Upper Plate For #KZ-01/BU/WO - 3RACING KZ-01B/WO
Price:
£1.85
Brand:
3Racing
Model:
KZ-01B/WO
Condition:
Brand New
Write a review

Aftermarket Upper Deck for MR-015

The KZ-01B/WO graphite upper plate is an optional aftermarket part for Kyosho Mini-Z MR-015 scale cars. It fits as a direct-style upper plate on KZ-01/BU/WO chassis, preserving the stock screw pattern while altering torsional stiffness and mass distribution at the top deck.

Installation follows standard Mini-Z practice: remove the original upper plate and attach the graphite plate using the chassis existing screw positions. Confirm screw lengths and internal clearances before final tightening to prevent interference with the motor or electronics. No extra specialised tools are necessary.

Used for tuning, the graphite increases torsional stiffness compared with thinner plastic plates, which concentrates setup changes on suspension and weight placement. Fit the plate, perform controlled handling tests, then make incremental adjustments to springs, dampers, or ballast to refine behaviour.

Compatibility

  • KZ-01/BU/WO

Is this plate reversible between left and right handed setups?

The plate is symmetric for the standard KZ-01/BU/WO layout and does not require mirror orientation changes for left or right handed configurations.

Can I add weight or drill holes in the plate?

Any modification may alter strength and fit; if you add ballast or drill holes, do so carefully and check for clearance with internal components before use.

What maintenance does a graphite plate need?

Inspect mounting holes and screw torque periodically, and check for hairline cracks after heavy use; clean with a soft brush and avoid solvents that could affect surrounding components.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved