Aluminum Front Shock Tower for Axial SCX6 JR-SCX603-BK by Jazrider  [JR-SCX603-BK]

Axial 1/6 SCX6 Jeep Aluminum Front Shock Tower Set (Black)
Price:
£19.23
Brand:
JAZRIDER
Model:
JR-SCX603-BK
Condition:
Brand New
Write a review

Front Mounting Tower — SCX6 Fitment Notes

This front shock tower set is intended for Axial 1/6 SCX6 Jeep models and is supplied as model JR-SCX603-BK. Fabricated from aluminum with a black finish, it is a direct upgrade option to replace the original plastic tower and provide a firmer anchor for shocks and linkages.

The tower’s function is to concentrate front suspension loads and reduce flex, helping maintain alignment during challenging terrain. Always check shock length, link geometry, and servo clearance against the tower before committing to installation.

Specifications

  • Item: Front shock tower set
  • Material: Aluminum
  • Model Number: JR-SCX603-BK
  • Compatibility: Axial SCX6 Jeep JLU Wrangler 4WD

Install this aluminum front shock tower to achieve a firmer mounting point for tuning or when replacing a damaged stock component; verify fitment and clearances with your existing setup.

Can I use this with aftermarket servo mounts?

You can use the tower with many aftermarket servo mounts, but check that the servo and mount clearances do not interfere with the tower or shock travel before fitting.

Is this suitable for non-Axial models?

This part is made for the Axial 1/6 SCX6 family; for other models verify hole spacing and geometry as cross-platform compatibility is not guaranteed.

Should I use thread locker on the screws?

Thread locker can be used if compatible with your assembly, but avoid threadlocker that is too strong for small fasteners if you plan to remove them regularly.

How often should I inspect the tower?

Inspect the tower after heavy runs or impacts for cracks around mounting holes and ensure screws remain tight; replace if any structural damage is found.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved