Aluminum Front Upright Knuckle Arms for TAMIYA TT01E/TT01ED - JR-TT101-RD by Jazrider  [JR-TT101-RD]

Tamiya TT01E / TT01ED Aluminum Front Upright Knuckle Arms (Red)
Price:
£8.63
Brand:
JAZRIDER
Model:
JR-TT101-RD
Condition:
Brand New
Available in shop
Write a review

Front knuckle upgrade for TT01E/TT01ED

This aluminium front upright (knuckle arm) is intended for TAMIYA TT01E and TT01ED chassis as an aftermarket hop-up. The JR-TT101-RD replaces the standard plastic piece with a machined metal component that maintains factory steering geometry while providing a firmer mounting point.

Use case: swap in these uprights to reduce deformation, stabilise steering link attachment, and improve the repeatability of toe and steering adjustments during setup. Fitting typically uses the original steering link pins and associated hardware and involves routine wheel removal and reassembly on the TT01E/TT01ED platform.

Confirmed compatibility is limited to TT01E and TT01ED; do not assume fit on other TT-01 models without verification. This part benefits drivers focused on setup consistency and longer-lasting front suspension connections.

How does this upright affect handling at the limit?

By resisting flex and maintaining steering geometry under load, the aluminum uprights help deliver more predictable steering response at the limit, aiding drivers when fine-tuning handling balance.

Will installing these change my setup strategy?

With a firmer mounting point you may notice reduced variance in toe and steering feel, which can make setup adjustments more repeatable and reduce the need for compensating trims.

Is the install reversible if I prefer the stock parts?

Yes, the uprights are designed to be a direct replacement for TT01E/TT01ED units and can be swapped back to the original plastic parts using the stock hardware if required.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved