Aluminum Rear Hub Carrier L/R for SO series - SO-415RA Yokomo  [SO-415RA]

Yokomo SO-415RA Aluminum Rear Hub Carrier L/R for SO series
Price:
£31.88
Brand:
Yokomo
Model:
SO-415RA
GTIN:
639342228669
Condition:
Brand New
Write a review
alt="Yokomo SO-415RA Aluminum Rear Hub Carrier L/R for SO series" title="Yokomo SO-415RA Aluminum Rear Hub Carrier L/R for SO series"

Aluminum hub carrier engineered for SO series fitment

Built for SO series 2WD off-road platforms, this aluminum rear hub carrier swaps in for the factory resin item to increase stiffness and make handling more consistent under stress.

In practice the aluminium carrier reduces hub flex during heavy impacts and strong acceleration, helping the chassis hold its line on jumps and through corners. The same height insert fits this carrier, so you can retain or modify roll centre and skid angle without changing the mounting layout.

Because the finished bores are precise, we advise installing new bearings during the upgrade; pressing in worn bearings may complicate future servicing. This component concentrates on reliable handling gains rather than cosmetic alteration.

Specifications

  • Item: Aluminum Rear Hub Carrier L/R
  • Material: Aluminum
  • Model Number: SO-415RA
  • Compatibility: SO series 2WD off-road, Universal, ROR-020, ROR-020RTR

Compatibility

  • SO series (2WD off-road)
  • Universal
  • ROR-020
  • ROR-020RTR

This aluminium replacement is aimed at drivers wanting a firmer rear hub assembly and more reproducible handling; fit new bearings and confirm roll-centre settings after installation to get the best results.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Is the SO-415RA compatible with ROR-020 and ROR-020RTR variants?

Yes. The part lists compatibility with SO series 2WD off-road models as well as Universal, ROR-020 and ROR-020RTR platforms, using the same mounting interfaces as the original carrier.

Will I need to alter axle or driveshaft alignment?

No axle repositioning is required; the aluminium carrier is designed to match OEM mounting points so driveshaft and axle alignment remain unchanged when fitted correctly.

Can I swap back to the resin carrier later?

Yes. The aluminium carrier is a direct replacement and the resin part can be refitted if you retain the original inserts and bearings, though bearing removal from the aluminium unit may require a puller.

Are any chassis or body clearances affected by this swap?

The external profile matches the stock geometry, so you should not see changes to chassis or body clearance. Always verify suspension travel and wheel clearance after installation to be safe.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved