APC AP0945E PROPELLER 9x4.5E Electric Replacement Prop for RC Models  [AP0945E]

APC PROPELLER 9x4.5E ELECTRIC
Price:
£2.83
Brand:
APC
Model:
AP0945E
Condition:
Brand New
Write a review

Product Brief: APC AP0945E 9x4.5E

The APC AP0945E 9x4.5E is an RC-scale replacement prop designed for electric-powered models. It provides an identical blade footprint for pilots conducting thrust and RPM trade-off testing without changing other hardware.

Switching to a 9x4.5 profile is a tuning action that affects thrust, electrical load on the motor, and the perceived RPM. Fitment checks should include confirming hub bore compatibility, correct shaft seating, securing the mounting hardware, and balancing the prop on a balancer to reduce vibrations in the airframe.

Installation notes: fully seat the prop on the motor shaft or adapter, torque the retaining nut or screw to the manufacturer's recommendation, and run a static spin test to detect rubbing or imbalance. During tuning flights, compare handling and motor temperature against the old prop and modify gear ratio or throttle endpoints to remain within safe limits.

How do I confirm this prop will deliver enough thrust for my model?

Estimate required thrust from your model's weight and intended flight style, then compare to typical thrust figures for 9x4.5 props on similar setups. Always verify on-ground first and confirm hub fit.

Are there recommended checks after the first flight with a new prop?

After the maiden flights, reinspect hub seating and fasteners, check for any loosening, and monitor motor temperature and vibration levels compared with previous data.

What installation practices reduce the chance of in-flight vibration?

Ensure the prop is seated square to the shaft, tighten fixing hardware evenly, align the spinner or adapter correctly, and use a balancer to achieve static balance before flight.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved