APC AP1004 10x4 RC Aircraft Propeller  [AP1004]

APC PROPELLER 10x4
Price:
£3.35
Brand:
APC
Model:
AP1004
Condition:
Brand New
Write a review

Fitment and expected behaviour

This APC AP1004 PROPELLER 10x4 is a model aircraft propeller sized 10x4 to align with common mounting and thrust characteristics for small to medium electric power units.

The description concentrates on practical fitment advice, installation guidance, and how the prop affects motor loading and thrust rather than promotional language. Confirm shaft diameter and spinner clearance as part of your preflight routine.

Installation notes: balance the prop on a balancer, attach it using the correct nut or adapter for your motor shaft, and verify there is sufficient clearance from fuselage or cowling throughout the blade arc.

Tuning role: fitting a 10x4 generally raises static thrust relative to higher pitch choices while keeping current demands reasonable on compatible motors and ESCs; change props gradually when refining climb or cruise behavior.

Which motor shaft diameters will accept this style of prop?

Check your motor shaft size first. Many small RC props are fitted to 3mm or 5mm shafts using the appropriate hub or adapter; select the correct adapter if needed for a secure fit.

Do I need to balance it before each use?

Balancing is recommended to reduce vibration, protect bearings, and improve handling. Even a new prop should be checked on a balancer and trimmed until it sits level.

What clearance checks should I perform after fitting?

Spin the prop at low throttle on the ground and inspect for any contact with the fuselage or control surfaces. Ensure spinner and cowling clear the blade at full RPM before flying.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved