APC AP11045EP Electric Reverse/Pusher 11x4.5EP Propeller  [AP11045EP]

Selection and fitment guidance

This APC AP11045EP 11x4.5 electric reverse/pusher propeller is supplied as an RC replacement for pusher or reverse-mounted electric setups. The size code provides a guide for diameter and pitch to help you choose the correct prop for your motor and airframe.

How to fit: place the prop on a compatible shaft or adapter, secure using the correct nut or spinner hardware, and ensure the rotation is appropriate for rear-mounted operation. Double-check clearance from tail surfaces and control linkages to avoid interference during use.

Handling and adjustment: perform a static balance to reduce vibration, inspect blades after any impact, and run low-power bench checks to confirm expected throttle response. Prop changes alter the power draw and flight handling, so adjust setup in small steps and monitor equipment temperatures.

Upkeep tips: keep mounting hardware clean, discard props with visible damage, and store spares flat to preserve blade geometry. Verify shaft diameter and mounting pattern before purchasing adapters, spinners, or hubs to ensure fit.