APC AP13045MRP Reverse/Pusher 13x4.5MR Propeller for Electric Multirotors  [AP13045MRP]

APC PROPELLER 13x4.5MR ELECTRIC MULTI ROTOR REVERSE/PUSHER
Price:
£4.28
Brand:
APC
Model:
AP13045MRP
Condition:
Brand New
Write a review

Installation and Fit Notes

The APC AP13045MRP propeller is an RC-scale replacement intended for electric multirotor use where reverse or pusher mounting is required. The 13x4.5MR marking identifies the diameter and pitch convention multirotor builders use to select blades that match motor and airframe needs.

Intended role: fine-tuning thrust and propulsion behaviour on electric RC multirotors. Fitment notes: confirm the motor shaft diameter and mounting method on your motor before installation, orient the propeller for the specified reverse or pusher rotation, and ensure secure seating and tight locking of the prop nuts or adapters.

Pre-flight checks: inspect for chips, cracks, or warping and replace if any damage is found, and balance the propeller to reduce vibration for consistent flight performance.

Will this prop fit my motor shaft and standard adapters?

Check the centre bore size of the APC AP13045MRP against your motor shaft and adapter specifications. If the bore does not match, use a compatible adapter sized for a secure, concentric fit to avoid runout.

Can I use it on both front and rear mounts that reverse rotation?

Yes, provided the prop orientation matches the airflow direction and the motor rotation. When swapping between forward and pusher locations, re-check balance and secure mounting each time.

Are there special adapter types recommended for this propeller?

Use adapters that maintain concentric alignment and clamp evenly, such as keyed collets or precision press-fit hubs. Avoid loose-fitting sleeves that allow axial play; secure clamping preserves balance and reduces vibration.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved