This APC AP13065EP is an RC-scale propeller designed for electric propulsion in pusher or reverse configurations. The 13x6.5EP code denotes diameter and pitch, and the EP indicator shows it is suited to electric pusher orientations.
Installation guidance: attach the propeller to the motor shaft with the correct rotation, tighten hub fixings to the torque guidance provided for your motor and adapter, and confirm blade orientation when used in pusher mode so the pitch produces the intended thrust.
Tuning role: changing to a 13x6.5EP affects motor load and the RPM band for peak thrust. Monitor current with a wattmeter during bench testing and balance the propeller prior to flight to reduce vibration that can impact servos, ESCs and airframe components.
Practical notes: check hub diameter and thread or collet compatibility with your motor, ensure prop wash and control surface clearances for pusher arrangements, and carry out brief low-speed taxi or glide checks after the initial fitment.
Copyright © 2008-2026 rcjaz.co.uk All rights reserved
