APC AP1613 16x13 RC Aircraft Replacement Prop  [AP1613]

APC PROPELLER 16x13 (120 PATTERN)
Price:
£9.46
Brand:
APC
Model:
AP1613
Condition:
Brand New
Write a review

Compatibility and Installation Notes

The APC AP1613 is a 16x13 propeller intended as a spare for electric-powered model aircraft and scale projects, offered to modelers needing a higher-pitch option for more speed or thrust. It is sold as a single propeller for hobby-scale applications.

Mounting is conventional: the 16x13 code identifies diameter and pitch, and the prop is intended to fit common hobby hubs when used with the correct shaft adapter and securing nut or prop retainer. Always check spinner depth and hub spacing to avoid contact with the airframe.

As an upgrade element the 16x13 changes thrust and RPM characteristics; expect increased pitch-driven speed and load with a corresponding rise in current draw, so match the prop to an ESC and motor that can cope. Balance before flight and inspect blades after any strikes or hard landings.

Which shaft diameters will accept this prop?

The prop fits standard hobby hubs but requires the correct shaft adapter for your specific shaft diameter; measure your motor shaft and use a matching adapter to ensure a secure fit.

Will this prop clear spinners on scale models?

Clearance depends on spinner design and backplate spacing; check depth and blade-to-spinner gap and use spacers or a different spinner if there is any interference.

Is the APC AP1613 suitable for both sport and scale aircraft?

Yes, it suits many sport and scale models provided the motor, ESC and airframe clearance are compatible; always verify electrical limits and physical fit before flying.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved