ARC A11 2mm Graphite Split Upper Deck Front - O-ARCP05 by Factory Pro  [FP-O-ARCP05]

Price:
£9.18
Brand:
Factory Pro
Model:
FP-O-ARCP05
Condition:
Brand New
Write a review

ARC A11 front split upper deck description

This front split upper deck is tailored for the ARC A11 chassis and is sold under Factory Pro part number O-ARCP05. It is manufactured as a 2mm graphite plate in a split layout to influence stiffness in the area ahead of the front bulkhead.

The split arrangement enables precise adjustments to left and right stiffness or experimentation with alternate deck thicknesses to tune turn-in and front traction. It is intended for 1/10 electric touring car competition and for venues where subtle chassis flex changes have measurable handling effects.

Fitting follows the ARC A11 factory mounting scheme: remove the stock front upper deck and install this part using the same screw points. After fitting, inspect servo area and suspension tower clearance and perform brief test laps to validate steering geometry and bump steer.

Is the material durable for regular track use?

Graphite is a stiff, lightweight material; the 2mm thickness offers increased stiffness compared with thinner decks and is suitable for regular track tuning provided you avoid hard impacts.

How should I evaluate handling after changing the deck?

Make one change at a time and run consistent test laps to compare lap times and driver feedback. Note differences in turn-in, mid-corner balance, and front traction to decide on further adjustments.

Will this affect overall chassis balance?

Yes. Increasing front upper deck stiffness can shift balance toward sharper turn-in and may reduce perceived understeer; monitor rear grip and adjust setup accordingly to maintain overall balance.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved