ARC A11 Upper Deck Brace 1.6mm Graphite - Compatible with ARC A11 O-ARCP08 by Factory Pro  [FP-O-ARCP08]

Price:
£5.67
Brand:
Factory Pro
Model:
FP-O-ARCP08
Condition:
Brand New
Write a review

Upper deck brace tailored for ARC A11 fit

The Factory Pro O-ARCP08 is an aftermarket upper deck brace developed for the ARC A11 chassis. Manufactured from 1.6mm graphite, it increases upper-deck stiffness to provide more distinct chassis feedback when making setup changes.

Intended for RC-scale competition, the brace matches the ARC A11 upper deck mounting layout. Fitted alone or alongside the stock brace, it changes load distribution during acceleration, braking and cornering so drivers can refine roll center and mid-corner balance without reworking suspension geometry.

Fitting notes: the design uses the A11’s existing upper-deck attachment points and generally retains standard fasteners; always verify clearance for electronics and the body before final tightening. During setup testing, expect modest but noticeable shifts in steering sensitivity and chassis equilibrium.

Will this change front/rear balance?

Yes. By stiffening the upper deck, the brace alters how the chassis reacts to load transfer, which can shift front/rear roll balance and mid-corner characteristics.

Do I need to alter suspension geometry?

No geometry changes are required. The brace influences load paths and handling feel without modifying suspension pickup locations.

How should I approach track testing with the brace?

Make controlled changes and record results: start with small roll balance tweaks and evaluate corner entry and mid-corner behavior to determine the best setup for the circuit.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved