ARRMA MINI KRATON 3S Aftermarket Rear Shock Tower 7075-T6 MAKM030 by GPM  [MAKM030]

ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030
Price:
£13.24
Brand:
GPM
Model:
MAKM030
GTIN:
4894538413229
Condition:
Brand New
Write a review
alt="ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030" title="ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030"
alt="ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030" title="ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030"
alt="ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030" title="ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030"
alt="ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030" title="ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030"
alt="ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030" title="ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030"
alt="ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030" title="ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030"
alt="ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030" title="ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030"

Stiff rear mount for suspension tuning

This rear shock tower is an aftermarket upgrade made to fit ARRMA MINI KRATON 3S 1/16 models. Manufactured from 7075-T6 aluminium, it offers a firm, low-mass mounting point that helps stabilise rear shock geometry during demanding use.

With multiple eyelet positions you can modify shock angle and leverage to influence traction and rotation. The unit ships pre-assembled; using a medium-strength threadlocker on the fasteners is recommended to keep everything secure.

For installation, remove the stock rear tower, position shocks in the preferred holes and refit the original bolts. Check full shock travel and clearance before completing final torque settings.

Compatible Models

  • ARRMA 1/16 MINI KRATON 3S DSC 4X4 RTR Brushless Speed Truck-ARA2508S
  • ARRMA 1/16 MINI KRATON 3S DSC 4X4 RTR Brushless Speed Truck-ARA2508

This 7075-T6 tower suits modelers who want a reliable, adjustable rear mounting point to refine handling without significantly increasing vehicle weight.

Is this a direct-fit item for the MINI KRATON 3S?

Yes — the tower is designed to match the OEM rear tower footprint on the ARRMA MINI KRATON 3S models listed in the compatibility list.

Will installing this change ride height?

No significant ride height change is expected. The main effect is a stiffer, more consistent mounting for the shocks rather than altering static height.

Does it ship assembled?

Yes. The tower is supplied pre-assembled to simplify installation; still verify alignment and clearances before running.

Are any setup changes recommended after fitting?

After fitting, re-check shock travel and consider small damping or spring adjustments to suit the new mounting geometry.

What factory part does this replace?

It is listed as a replacement for factory part number ARA-2664 and uses the same mounting positions for a direct swap.

What is included with the product?

The package contains a single pre-assembled rear shock tower ready for installation; original hardware is typically reused.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved