ARRMA Notorious/Kraton/Talion 115mm Alloy Front Shock for 1/8 Trucks - MNV6115F by GPM  [MNV6115F]

ARRMA NOTORIOUS 6S Alloy Front Shock 115mm - GPM MNV6115F
Price:
£24.86
Brand:
GPM
Model:
MNV6115F
Condition:
Brand New
Write a review
alt="ARRMA NOTORIOUS 6S Alloy Front Shock 115mm - GPM MNV6115F" title="ARRMA NOTORIOUS 6S Alloy Front Shock 115mm - GPM MNV6115F"
alt="ARRMA NOTORIOUS 6S Alloy Front Shock 115mm - GPM MNV6115F" title="ARRMA NOTORIOUS 6S Alloy Front Shock 115mm - GPM MNV6115F"
alt="ARRMA NOTORIOUS 6S Alloy Front Shock 115mm - GPM MNV6115F" title="ARRMA NOTORIOUS 6S Alloy Front Shock 115mm - GPM MNV6115F"

115mm Front Shock Specification

This aftermarket 115mm front shock is produced as an RC replacement for the ARRMA 1/8 models listed below and is supplied by GPM under model MNV6115F. The shock body is machined from aluminium 6061-T6 to deliver improved rigidity over stock plastic components, and it is specified for a 115mm centre distance to match front mount geometry.

Mechanical improvements include a reinforced 6.0mm shock shaft replacing the original 4.0mm design, and standard springs at 2.0mm wire diameter. The shocks are factory prefilled with 1000cSt silicone oil to provide firmer rebound and consistent damping. An additional softer spring pair at 1.7mm wire diameter is included for alternative setup options.

Products ship pre-assembled for quick installation. For improved mounting security under demanding conditions, apply medium-strength screw glue to fasteners prone to vibration. This item is intended only for hobby RC use.

Compatible Models

  • ARRMA 1/8 Notorious 6S V6 4X4 BLX Brushless Stunt Truck RTR-ARA8611V6
  • ARRMA 1/8 Kraton 6S EXB 4X4 RTR Brushless Speed Truck-ARA8708V6
  • ARRMA 1/7 Talion 6S EXB 4X4 RTR Brushless Speed Truck-ARA7707V6
  • ARRMA 1/8 Kraton 6S 4X4 RTR Brushless Speed Truck-ARA8608V6

These alloy front shocks offer a firmer, more serviceable front end for compatible ARRMA 1/8 trucks; adjust spring and oil selections to refine handling for your chosen surface.

Do these replace the original front shocks on all ARRMA 1/8 models?

They are intended for the specific ARRMA models listed in the Compatible Models section. Confirm your truck matches one of those model entries to ensure correct front mounting geometry and fitment.

What are the main serviceable parts on these shocks?

The shocks are serviceable for oil and spring changes, and their stronger 6.0mm shafts and aluminium bodies make routine maintenance and part replacement straightforward compared with some stock units.

Is the oil viscosity suitable for competitive running?

The factory 1000cSt oil gives a firmer rebound suitable for high-speed or aggressive driving; however, competitive tuning often involves trying lower viscosities to achieve quicker recovery and different handling balances.

How much stiffer is the shaft compared with stock?

The shaft diameter is increased to 6.0mm from the typical 4.0mm, which significantly reduces bending and improves consistency under load, giving a firmer feel at the wheel.

Are these shipped ready to fit or do they need assembly?

Shocks are shipped pre-assembled for quick installation. Inspect the mounting hardware and alignment on first fit and consider using medium-strength screw glue on selected fasteners if you expect heavy vibration.

Can I tune them for different surfaces?

Yes. Changing spring rates and oil viscosity lets you fine tune ride height, compression control and rebound to suit hardpack, loose dirt or paved surfaces. The extra 1.7mm springs provide a softer baseline to start from.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved