ARRMA Talion 6S EXB 4140 Steel CVD Center Front 116mm Rear 180mm Upgrade MTV6037S by GPM  [MTV6037S]

ARRMA Talion 6S EXB 4140 Steel Center Front 116mm And Rear CVD Driveshaft 180mm
Price:
£16.94
Brand:
GPM
Model:
MTV6037S
Condition:
Brand New
Write a review

Upgraded 4140 CVD drive components for Talion

These CVD driveshafts are supplied as scale replacements for ARRMA Talion 6S EXB models and are produced in hardened 4140 steel to enhance wear resistance and torsional rigidity. The components mirror original geometry for straightforward replacement of center front and center rear drives.

The kit details a center front CVD length of 116mm and a center rear CVD length of 180mm, with a pin thickness of 3.0mm. A hardened black finish helps reduce surface wear and maintain reliable joint contact.

Offered as direct-fit items, the parts correspond to manufacturer references AR310472+ARA-3398 and are sized to preserve the Talion 6S EXB chassis drivetrain and suspension geometry.

Compatibility and setup advice: installing hardened 4140 CVDs limits drivetrain deflection under higher loads, supports gearbox and diff alignment, and can slow wear to mating cups when installed with correct clearances. Inspect hub seating and confirm free rotation during full suspension travel to avoid binding.

Compatible Models

  • ARRMA 1/7 Talion 6S EXB 4X4 RTR Brushless Speed Truck-ARA7707V6

For Talion 6S EXB drivers seeking stronger direct-fit replacements, the GPM 4140 steel CVD set supplies robust centre front and rear shafts designed to prioritise durability and consistent drivetrain performance in 4x4 RC racing situations.

Do these fit all Talion 6S EXB RTRs or only certain versions?

They are sized for ARRMA Talion 6S EXB configurations matching the original references; check your vehicle part numbers, but they are intended to replace AR310472+ARA-3398 components on standard 1/7 Talion 6S EXB 4x4 RTR models.

Will switching to these affect differential performance?

By reducing drivetrain flex, the hardened 4140 shafts help maintain consistent alignment between gearbox and diff outputs, which can stabilise diff performance under load, though final behaviour depends on the whole drivetrain setup.

Exact dimensional specs provided in the kit?

The kit lists the following: center front CVD 116mm, center rear CVD 180mm, and pin thickness 3.0mm as the supplied measurements.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved