ARRMA Talion 6S EXB 4x49mm Rear Lower Suspension Pins Outside MTV6/PIN49 by GPM  [MTV6/PIN49]

ARRMA Talion 6S EXB 4140 Steel Rear Lower Suspension Pins (Outside) 4x49mm - GPM MTV6/PIN49
Price:
£3.62
Brand:
GPM
Model:
MTV6/PIN49
Condition:
Brand New
Write a review

Outside rear lower pin, 4x49mm replacement

This is an aftermarket replacement pin set intended for ARRMA Talion 6S EXB scale models, supplied by GPM as part number MTV6/PIN49. The pins are machined from 4140 steel, heat-treated and blackened to resist wear under repeated loading in RC suspension systems. They replace factory part AR330194 and are sized 4x49mm for the outside rear lower suspension location.

The role of these pins is to provide the pivot and retention point for the rear lower suspension arm; correct seating prevents unwanted play and preserves predictable handling. This kit may come pre-assembled where applicable, and the maker suggests using a medium-strength thread locker on relevant fasteners to reduce loosening from impacts or high-speed runs.

To fit: remove the rear lower arm retaining hardware, replace the factory pins with these 4x49mm pins, then refit locknuts and torque according to the vehicle manual. After replacement check suspension travel, wheel alignment and ensure pivot movement is free from binding.

Compatible Models

  • ARRMA 1/7 Talion 6S EXB 4X4 RTR Brushless Speed Truck-ARA7707V6
  • ARRMA 1/8 Talion 6S 4X4 RTR Brushless Speed Truck-ARA106048
  • ARRMA 1/8 Talion 6S BLX 4WD Extreme Bash Speed Truggy RTR-ARA8707
  • ARRMA 1/7 Fireteam 6S 4X4 BLX Speed Assault Vehicle RTR-ARA7618
  • ARRMA 1/7 Big Rock 6S 4X4 BLX Monster Truck RTR-ARA7612
  • ARRMA 1/8 Notorious 6S BLX 4WD Brushless Classic Stunt Truck With Spektrum RTR-ARA106044
  • ARRMA 1/8 Notorious 6S V5 4X4 BLX Stunt Truck With Spektrum Firma RTR-ARA8611V5
  • ARRMA 1/8 Kraton 6S BLX 4WD Brushless Speed Monster Truck With Spektrum RTR-ARA106040
  • ARRMA 1/8 Kraton 6S 4X4 Roller Brushless Speed Truck-ARA106053
  • ARRMA 1/8 Kraton 6S V5 4X4 BLX Speed Monster Truck With Spektrum Firma RTR-ARA8608V5
  • ARRMA 1/8 Kraton 6S EXB AVC 4X4 RTR Brushless Speed Truck-ARA8708T1
  • ARRMA 1/8 Kraton 6S EXB 4X4 RTR Brushless Speed Truck-ARA8708V6
  • ARRMA 1/8 Outcast 6S BLX 4WD Extreme Bash Stunt Truck RTR-ARA8710
  • ARRMA 1/8 Outcast 6S BLX 4WD Brushless Stunt Truck RTR-ARA106060
  • ARRMA 1/8 Outcast 6S BLX 4WD Brushless Stunt Truck-ARA106042
  • ARRMA 1/8 Typhon 6S 4X4 RTR Brushless Buggy-ARA106046
  • ARRMA 1/7 Infraction 6S 4X4 RTR Brushless All-Road Street Bash-ARA109001
  • ARRMA 1/7 Limitless 8S Avc 4X4 RTR Brushless Street Speed-ARA7816
  • ARRMA 1/7 Limitless 8S AVC 4X4 RTR Brushless Street Speed Machine Combo-ARA7816SPMX
  • ARRMA 1/7 Limitless 6S V2 Speed Bash Roller-ARA7116V2
  • ARRMA 1/7 Limitless All-Road Speed Bash-ARA109011
  • ARRMA 1/7 Mojave 6S BLX 4WD Brushless Desert Truck RTR-ARA106058
  • ARRMA 1/7 Mojave 6S V2 4X4 BLX Desert Truck With Spektrum Firma RTR-ARA7604V2
  • ARRMA 1/7 Mojave 6S EXB 4X4 Roller Brushless Desert Truck-ARA7204
  • ARRMA 1/8 Typhon 6S V5 4X4 BLX Buggy With Spektrum Firma RTR-ARA8606V5
  • ARRMA 1/8 Notorious 6S V6 4X4 BLX Brushless Stunt Truck RTR-ARA8611V6
  • ARRMA 1/8 Kraton 6S 4X4 BLX Brushless Speed Monster Truck RTR-ARA8608V6
  • ARRMA 1/7 Felony 6S BLX Street Bash All-Road Muscle Car RTR-ARA7617V2
  • ARRMA 1/7 Infraction 6S BLX V2 All-Road Truck RTR-ARA7615V2

Will these pins fit other ARRMA rear assemblies?

They are intended for the outside rear lower spot on the listed ARRMA models; confirm part numbers and dimensions for different model years before fitting.

Do I need to check alignment after replacing pins?

Yes. After replacement verify suspension travel and wheel alignment, and check for any play at the pivot to ensure correct geometry.

What maintenance keeps these pins performing well?

Periodically inspect for wear, clean debris from pivots, apply light lubrication as needed, and re-torque fasteners if required after heavy use.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved