Arrowmax AM-171034 Aluminium Set-Up Frame for 1/10 Off-Road Buggies  [AM-171034]

Arrowmax AM-171034 Set-Up Frame For 1/10 Off-Road Cars Black Golden
Price:
£53.27
Brand:
Arrowmax
Model:
AM-171034
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Compatibility and Setup Notes

The Arrowmax AM-171034 is a dedicated set-up frame for 1/10 off-road buggies that offers a secure, non-abrasive support for routine servicing and adjustments. The unit combines an aluminium lower structure with a 2mm carbon-fiber top plate and foam protective pads to avoid contact marks on painted parts.

Dimensioned at 163x107x55mm, the stand lifts the chassis to a convenient working height while remaining compact enough to fit into typical pit storage. The black-and-golden honeycomb appearance is a surface finish; the load-carrying elements are aluminium and carbon-fiber as listed.

It is intended for tasks such as suspension checks, wheel swaps, body trimming, and access to electronics. The foam pads protect hub finishes and the carbon top serves as a flat reference surface for levelling and simple measurement tasks.

Specifications

  • Item Set-Up Frame / Car Stand
  • Material Aluminium stand, 2mm carbon-fiber top plate, foam pads
  • Model Number AM-171034
  • Compatibility 1/10 scale off-road buggies
  • Top Plate Thickness 2mm
  • Dimensions 163x107x55mm
  • Finish Black and golden honey-comb pattern

A practical and portable stand that keeps a 1/10 off-road buggy stable and protected during set-up and minor maintenance tasks.

Will this stand suit low-profile or raised-ride-height setups?

The platform height of 55mm allows for a range of 1/10 off-road wheel and tyre combinations. For unusually tall or very low setups check wheel clearance before lifting the chassis fully onto the pads.

Can it support both short-wheelbase and long-wheelbase 1/10 buggies?

The stand is sized for typical 1/10 off-road layouts. Position the chassis so the foam supports contact solid mounting areas; very non-standard chassis may need additional support points.

Is the surface suitable for body trimming and electronics access?

Yes. The foam pads protect bodywork while the flat carbon plate provides a stable surface for opening electronics bays and trimming shells without scratching finishes.

Does the decorative finish affect grip or slippage?

The honeycomb finish is cosmetic only and does not change how the foam pads engage the chassis. For extra slip resistance, ensure the pads are clean and correctly located under the key contact points.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved