Arrowmax AM-200111 8x12x3.5mm Bearings Set for RC Models (2-Pack)  [AM-200111]

Arrowmax AM-200111 Ball Bearing 8*12*3.5 (2)
Price:
£4.36
Brand:
Arrowmax
Model:
AM-200111
Condition:
Brand New
Write a review

Consistent rotation for everyday tuning

Even small bearing upgrades can shave vibration and drag from your drivetrain. Arrowmax AM-200111 bearings in 8x12x3.5mm size are made to offer steady rolling and dependable service in hobby use. Their construction aims to balance smooth operation with lasting durability.

How these bearings protect your drivetrain

By lowering resistance at pivot points and shafts, Arrowmax AM-200111 bearings reduce strain on gearboxes and axles. That reduction in load helps prevent premature wear on interconnected components.

Compatibility notes and fitting advice

The 8x12x3.5mm format fits many common mounting spots in cars and buggies. For best results, press the bearing evenly and confirm it is fully seated to avoid misalignment or binding.

They will work if the hub bore accepts an 8x12x3.5mm bearing. Check hub clearance and remove any old sealant before installing to ensure a flush fit.
Use a light bearing oil for slick indoor tracks and a slightly thicker grease for outdoor tracks where contamination is a concern. Apply sparingly to avoid attracting dirt.
Inspect bearings after heavy sessions or every few runs for signs of roughness or play. Regular checks help prevent damage to hubs and gears.
Many hobby shops stock common sizes like 8x12x3.5mm, but check for the Arrowmax AM-200111 model if you need the same specification and quality level.
Keep bearings clean, relube as needed, avoid driving them in heavy water, and fit them with correct tools to prevent race damage. These practices will help maintain smooth rotation for longer.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved