Arrowmax am-210020 5,000cst Diff Oil 59ml  [am-210020]

Arrowmax Silicone Diff Fluid 59ml 5.000cst
Price:
£0.00
Brand:
Arrowmax
Model:
am-210020
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Overview of silicone diff oils for RC

The Arrowmax am-210020 silicone diff fluid is formulated for use inside RC differential cases to refine traction and handling balance. Supplied as 59ml of 5,000cst oil, it provides a higher-viscosity option for tighter diff behaviour on electric models.

Use for diff rebuilds or when changing the internal damping to match surface grip and driver preference. Consistency in filling and bleeding procedures is crucial when evaluating different viscosities.

  • Application: fill the diff case to the recommended level for your diff type, avoid air pockets for consistent behaviour.
  • Tuning role: higher cst values increase internal resistance and can reduce inside-wheel spin under power, lower values allow freer differential action.
  • Handling and storage: keep cap sealed and store upright away from extreme heat, and use a clean syringe or applicator to prevent contamination.

Specifications

  • Item: Arrowmax Silicone Diff Fluid
  • Model Number: am-210020
  • Volume: 59ml
  • Viscosity: 5,000cst
  • Type: Silicone oil for RC differentials

Consider this product a measured consumable; apply precise volumes and repeatable methods to obtain consistent handling results.

A 5,000cst rating denotes a relatively viscous silicone oil that increases resistance to differential action, producing firmer damping and less relative wheel speed under load.
Bleeding correctly is essential: rotate the diff while adding fluid to expel air, top up to the recommended level, and recheck after a few turns to ensure no cavities remain that could affect performance.
Mixing yields intermediate viscosities but can unpredictably alter handling traits and long term behaviour; if mixing, note ratios and validate performance in testing before use in critical sessions.
A fine syringe or calibrated dropper provides the best control for small volumes. Work on a clean surface and keep tools dedicated to diff fluids to avoid cross-contamination.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved