Arrowmax AM-348024 24T 48P 7075 Aluminium Hard Pinion Gear  [AM-348024]

Arrowmax AM-348024 Pinion Gear 48P 24T 7075 Hard
Price:
£3.93
Brand:
Arrowmax
Model:
AM-348024
Condition:
Brand New
Write a review

Arrowmax AM-348024 Pinion Gear Summary

The Arrowmax AM-348024 pinion is produced from 7075 aluminium to offer a durable gearbox component. It is suitable for hobbyists seeking a balance of toughness and low weight in their drive train parts.

48 Pitch 24 Tooth Specification

As a 48 pitch, 24-tooth pinion, it provides predictable engagement with matching spur gears. The 7075 aluminium delivers a notable strength-to-weight ratio, making it applicable across many 1/10 scale on-road and similar setups.

Practical Installation Guidance

Achieve correct mesh by fine tuning the pinion position relative to the spur and secure the grub screw properly. Routine cleaning and tooth inspections will reduce the chance of unexpected failures.

Can the AM-348024 be used in club level racing?

Yes, if your class permits aluminium pinions and the vehicle uses 48 pitch gearing. Confirm class rules and always check compatibility with your chassis before racing.

What signs indicate the pinion needs replacing?

Look for rounded tooth edges, inconsistent mesh marks, or noise under load. Any of these indicate the pinion should be replaced to protect the spur gear.

Are special lubricants required for this pinion?

No special lubricant is required for the pinion teeth, but use appropriate grease for bearings and maintain a clean spur interface. Avoid heavy oils that attract dirt to the gear mesh.

Do I need to shim the motor mount after fitting?

Sometimes minor shimming is needed to get ideal mesh. Make small adjustments and recheck after a short run to ensure the mesh remains consistent.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved