Arrowmax AM-364062 7075 Aluminium 64P 62T Racing Pinion  [AM-364062]

Arrowmax AM-364062 Pinion Gear 64P 62T 7075 Hard
Price:
£5.58
Brand:
Arrowmax
Model:
AM-364062
Condition:
Brand New
Write a review

Durable Pinion for Precise Gear Engagement

The Arrowmax AM-364062 64P 62T pinion is intended to sharpen drivetrain accuracy and extend service life in RC models. Built from 7075 aluminium, it combines toughness with light mass to suit spirited track use.

Why Choose 7075 Aluminium for Gears

7075 aluminium offers high strength while keeping weight modest. That makes it a sensible choice where you need a durable pinion without compromising the car's dynamic balance.

Tooth Count and Pitch for Consistent Drive

The 64 pitch and 62 tooth combination promotes steady engagement and efficient transfer of motor output to the spur gear. It works well for model builders adjusting ratios for lap time or traction needs.

How do I verify this pinion matches my motor shaft?

Measure your motor shaft diameter and confirm the pinion bore or adapter suits it. Also ensure the set screw type is compatible with your motor's flat or D-shaft configuration.

Will this change my car's acceleration or top speed?

Changing pinion tooth count alters final drive; a smaller pinion increases acceleration but reduces top speed, while a larger pinion does the opposite. Choose 62T based on your track and motor setup.

What checks should I do after fitting the pinion?

After fitting, check gear mesh across a few rotations, verify the set screw is secure, and run a short test to listen for any unusual noise. Reinspect after the first run and adjust if needed.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved