Arrowmax AM-700714 Ultra Low Profile 2S LiPo Battery Pack Competition Series  [AM-700714]

Arrowmax AM-700714 AM Lipo 5500mAh 2S TC Ultra Low Profile - 7.6V 65C Continuous 130C Burst 5mm (Si-Graphene)
Price:
£54.59
Brand:
Arrowmax
Model:
AM-700714
Write a review

Arrowmax AM-700714: Compact Competition Battery

The Arrowmax AM-700714 Ultra Low Profile 2S LiPo Battery Pack packs 5500mAh into a low-profile shell to help maintain a low centre of gravity in race cars. It is built to give reliable voltage under load while fitting into tight battery bays.

Performance and Advantages

Equipped with Si-Graphene cells, the Arrowmax AM-700714 improves energy density and supports steady output through long runs. With a continuous 65C rating and a 130C burst capability, the pack is suited to competitive driving where consistent power and compact installation matter.

Specifications

  • Voltage: 7.6V
  • Capacity: 5500mAh
  • Continuous Discharge Rate: 65C
  • Burst Discharge Rate: 130C
  • Dimensions: 139mm x 47mm x 22.5mm
  • Connector Type: 5mm

For competition drivers who need a high-capacity, low-profile 2S option, Arrowmax AM-700714 provides a predictable power curve and straightforward installation in most race chassis.

Is the 5mm connector compatible with standard ESC plugs?

The pack uses a 5mm connector which is common on many setups. Check your ESC plug type and, if needed, fit an adapter or replace the connector with a soldered match performed by someone comfortable with LiPo wiring.

How should I mount the battery to reduce movement?

Secure the pack with the chassis straps or mount tabs supplied by your car, and use foam padding where needed to prevent shifting. A tight fit reduces wear on leads and keeps the centre of gravity stable mid corner.

What maintenance keeps these packs healthy?

Keep cells balanced after each session, avoid deep discharge, and inspect for swelling or damage. Use a proper LiPo balance charger and avoid leaving packs fully charged for long periods.

Can I use this in brushless setups with high current draw?

Yes, the 65C continuous and 130C burst ratings make it suitable for many brushless systems, though you should ensure the ESC and motor combination do not demand sustained currents beyond the pack rating.

What should I look for when buying a replacement pack?

Match the voltage, capacity, dimensions and connector to your chassis and power system. Consider chemistry, discharge rating and how the pack will affect handling before committing to a replacement.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved