Auper D6 Single Front Shock SAK-D6807C/PU (Purple) Upgrade by 3Racing  [SAK-D6807C/PU]

Price:
£10.26
Brand:
3Racing
Model:
SAK-D6807C/PU
Condition:
Brand New
Write a review

Single front shock: swap and upgrade for Auper D6

This front mono shock unit is intended for RC application on the Auper D6 chassis, providing a front single-shock option. Presented in purple, it functions as a hop-up or replacement part where the Auper D6 front mono configuration is required.

Fitting is achieved through the chassis front shock mounts and standard mounting hardware; the component replaces the stock front mono absorber and integrates with the Auper D6 front suspension linkages when mounted to the correct points, without modifying the chassis.

From a setup standpoint, a mono absorber alters front load paths and requires tuning of springs and shock oil to refine handling balance, turn-in response, and traction for driving sessions.

Is this a robust long-term replacement for the original front absorber?

The unit is produced as an aftermarket replacement intended to match the stock fitment. Actual durability will depend on use pattern and maintenance, so inspect mounting points and seals periodically.

Will it work with the Auper D6 stock front link setup?

Yes. When installed on the correct mount points the absorber integrates with the existing front link geometry on the Auper D6 without additional modifications.

Does switching to a mono absorber require other changes to the car?

Switching to a mono setup usually means revisiting spring rates and shock oil to rebalance the front. Other components typically remain the same, but expect to spend time tuning to achieve the desired handling.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved