Awesomatix A800MMX Graphite Upper Deck 2.0mm O-ACP003 by Factory Pro  [FP-O-ACP003]

Graphite one-piece upper deck built for the A800MMX

The Factory Pro O-ACP003 is an aftermarket upper deck made for the Awesomatix A800MMX and supplied as a single 2.0mm graphite plate. It is intended to locate to the stock upper-deck mount points and adjust chassis stiffness and flex without changing the suspension geometry.

From a setup viewpoint the thicker 2.0mm graphite increases torsional rigidity versus thinner plates, producing sharper turn-in and reduced mid-corner compliance. Fit this deck when you need a firmer chassis response on medium to high grip circuits or to tune a softer lower deck and damper setup. Anticipate predictable chassis-level effects rather than an instant handling fix.

Installation follows the same mounting pattern as the original upper deck: remove the stock plate, fit the Factory Pro unit to the A800MMX mounting points, then check bulkhead alignment and clearance for radio gear, ESC and servo before torquing fasteners.

Select this Factory Pro deck to stiffen an A800MMX chassis and fine tune handling for higher-traction tracks; always verify fitment and electronic clearances during the install.