Axial 1/6 SCX6 Replacement Steering Knuckle Carriers C-Hubs - JR-SCX602-BK by Jazrider  [JR-SCX602-BK]

Upgraded Steering Knuckles and C-Hubs for the SCX6

This aluminium steering knuckle carriers and C-hubs set is an RC-scale replacement made for Axial 1/6 SCX6 Jeep JLU Wrangler 4WD machines. The copy emphasizes compatibility checks, assembly considerations, and how the parts interact with steering and chassis maintenance.

Choose this set when a solid metal steering mount is preferred for rock crawling or accurate trail driving. The carriers supply a rigid mounting surface for linkages and wheel hexes, and they are intended to interface with standard SCX6 suspension and steering hardware without altering motor, ESC, or servo components.

Fitting advice: verify wheel hex fit and existing screw lengths, confirm carrier orientation before final tightening, and inspect steering endplay after fitting. If you change toe or caster using shims or different link lengths, recheck steering clearance to prevent binding issues.

Suited to modders wanting a metal upgrade for the SCX6 steering interface; observe standard RC maintenance and correct torque values during installation.