Axial Racing AX10 Deadbolt Heatsink Motor Mount Upgrade - AX10-24015-OR by Jazrider  [AX10-24015-OR]

Motor Mount Plate with Heat Sink for AX10 Deadbolt

This aluminium motor plate incorporates a passive heat sink and is produced for the Axial Racing AX10 Deadbolt chassis, carrying model number AX10-24015-OR. The orange finish is scale friendly while the finned surface aids in moving heat away from the motor mount area during technical crawling sessions.

Fit and compatibility assume the AX10 Deadbolt motor bolt pattern. The plate is intended to match the AX10 Deadbolt motor mounting points; confirm your chassis wiring and bolt locations before installing. This is an aftermarket accessory for scale electric vehicles, not for real-world vehicles.

To install, remove the motor and ensure wiring clearance, mount the replacement plate to the chassis bosses, check pinion-to-spur alignment, then refit and secure the motor maintaining correct mesh. The heatsink element is passive so avoid blocking the fins with batteries, ESCs, or wiring.

In tuning terms, the plate stabilises motor positioning and provides modest passive cooling at the mount interface. For best outcome pair with correct gear mesh, ventilated component placement, and motor/ESC settings tuned to your driving style.