Axial Racing SCX10 Scale 90mm Internal Shocks SCX090X by GPM  [SCX090X]

Axial Racing SCX10 Aluminium Front/Rear Internal Shocks (90mm) With Engraving - 1pr set - GPM SCX090X
Price:
£13.98
Brand:
GPM
Model:
SCX090X
GTIN:
4894538011265
Condition:
Brand New
Write a review
alt="Axial Racing SCX10 Aluminium Front/Rear Internal Shocks (90mm) With Engraving - 1pr set - GPM SCX090X" title="Axial Racing SCX10 Aluminium Front/Rear Internal Shocks (90mm) With Engraving - 1pr set - GPM SCX090X"
alt="Axial Racing SCX10 Aluminium Front/Rear Internal Shocks (90mm) With Engraving - 1pr set - GPM SCX090X" title="Axial Racing SCX10 Aluminium Front/Rear Internal Shocks (90mm) With Engraving - 1pr set - GPM SCX090X"
alt="Axial Racing SCX10 Aluminium Front/Rear Internal Shocks (90mm) With Engraving - 1pr set - GPM SCX090X" title="Axial Racing SCX10 Aluminium Front/Rear Internal Shocks (90mm) With Engraving - 1pr set - GPM SCX090X"
alt="Axial Racing SCX10 Aluminium Front/Rear Internal Shocks (90mm) With Engraving - 1pr set - GPM SCX090X" title="Axial Racing SCX10 Aluminium Front/Rear Internal Shocks (90mm) With Engraving - 1pr set - GPM SCX090X"

Scale 90mm Internal Shock Pair

This matched pair of internal shocks is aimed at Axial Racing SCX10 chassis owners and features aluminium construction with engraved identifiers to aid quick part recognition. The shocks are supplied as a pair and measure 90mm to match typical SCX10 specifications.

Installation calls for removing the original shocks and opening the shock bodies to fit pistons and oil before mounting to SCX10 shock towers and axle brackets. Basic metric hex drivers and common shock tools are suitable for assembly and filling.

In operation, the aluminium internals change damping response and ride height and provide a tuning path for scale rock crawling and trail runs. Engraved IDs cut down setup time by keeping parts organised, while aluminium construction improves stiffness over moulded plastic alternatives.

Specifications

  • Item: Axial Racing SCX10 front/rear internal shocks (90mm).
  • Material: Aluminium.
  • Model Number: SCX090X.
  • Compatibility: Axial Racing SCX10.

Recommended when you want a metal internal shock option for consistent fit and obvious part identification during tuning or routine maintenance.

Do these replace both front and rear shocks?

Yes, the set is sold as front and rear internals sized at 90mm, suitable as a direct replacement for stock SCX10 internal units with matching dimensions.

Will aluminium bodies affect flex?

Aluminium bodies increase rigidity compared to plastic, which can sharpen response; tune oil and springs to restore the desired suspension feel.

Is special lubrication required?

Use standard shock oil for the pistons and apply light thread lubricant where metal parts contact to prevent corrosion and ensure smooth operation.

Can I swap these onto different 90mm shocks?

They are intended for SCX10 90mm layouts; other platforms with the same mounting geometry may accept them, but always verify hole spacing and clearance first.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved