This RC-scale C hub carrier is made for the Axial Racing Wraith chassis and is supplied by JAZRIDER as model AW-23012-BK. CNC-machined from aluminium, it is intended to replace the original plastic or alloy carriers used at the wheel hubs.
The carrier sets the hub relation to the steering knuckle and suspension, so it impacts toe, scrub radius and overall steering geometry. The aluminium version increases local stiffness and improves wear characteristics compared with common stock materials, while remaining designed to accept standard Wraith hub assemblies.
To fit the carrier: remove the wheel and hub, take off the old carrier, transfer bearings and retaining hardware where applicable, then secure the new unit using original bolts. After installation, verify bearing alignment and check steering travel for any binding or contact.
Compatibility note: the part is intended as an aftermarket upgrade for Wraith platforms where dependable steering geometry and longevity are priorities for trail and rock use.
Copyright © 2008-2026 rcjaz.co.uk All rights reserved
