Axial Racing Yeti XL Front Knuckle Steel King Pins Replacement - GPM YTL004S [YTL004S]

Axial Racing Yeti XL Steel King Pin For Front Knuckle(AX31046) - 4pcs - GPM YTL004S

Price:

£1.85

Brand:

GPM

Model:

YTL004S

GTIN:

4894538243161

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the

Spares / Hop-ups - Axial Racing - YETI XL

Front knuckle steel king pins

This is a service replacement king pin set for the Axial Racing Yeti XL front knuckle, listed under GPM model YTL004S. The pack contains four steel king pins that locate the knuckle in the hub carrier and resist the shear loads typical in off-road RC use.

Replacement is straightforward for experienced hobbyists: remove the wheel and knuckle assembly, extract the worn pins from the hub carrier, and fit the new steel pins ensuring correct seating and alignment with the existing bearings and hardware. Check for free rotation and avoid over-tightening adjacent hex screws to prevent binding.

Fit these pins as direct replacements for damaged or worn items, and inspect mating faces during routine servicing to maintain consistent steering feel and suspension behaviour.

Are these compatible with the Axial Yeti XL knuckle?

They are specified for Axial Racing Yeti XL front knuckle assemblies; confirm the knuckle part number AX31046 to ensure correct fitment before installation.

What is the recommended installation method?

Remove the wheel and knuckle, drive out old pins, press or tap in the new steel pins, confirm the knuckle spins freely, and reassemble without excessive torque on surrounding screws.