Axial Racing Yeti XL L-shape Front/Rear Damper 150mm - YTL150F/R/L by GPM  [YTL150F/R/L]

L-shape 150mm Damper for Yeti XL Builds

This aluminium L-shape damper is a scale RC spare produced for the Axial Racing Yeti XL platform. Supplied as one pair (1pr) at 150mm, it is fitted with a 6mm steel shaft and intended to replace or upgrade front or rear shock assemblies where the chassis requires an L-shape orientation.

Fitment and role: the damper is identified as compatible with Axial Racing Yeti XL and acts within the suspension to affect ride height, damping behaviour and wheel control. Its adjustable nature supports basic tuning ranges without modifying key suspension geometry.

Installation notes: provided as a finished damper assembly; confirm the Yeti XL mounting points correspond with the L-shape shock ends prior to fitting. Most installations reuse stock hardware, so keep original ball ends and mounting pins where practical. Perform a test fit to ensure travel and clearance in both front and rear positions.

Maintenance and tuning tips: check shaft straightness and seal condition during routine service, use suitable shock oil and spring rates for the handling you want, and make small, measured adjustments while evaluating performance.

A direct aluminium upgrade for Axial Yeti XL tuners after a 150mm L-shape front/rear unit with a strong 6mm shaft to refine damping without changing chassis geometry.