This 3pc direct-fit kit replaces the differential output bevel and the motor pinion for Axial platform gearboxes. Parts are made from hardened steel #45 and the bevel gear features a spiral tooth profile to reduce shock loading and improve meshing under torque.
Included parts: diff bevel gear 38T (1pc), pinion gear 13T (1pc), M4*2.5*12 screw pin (1pc). Note: the M4*2.5*12 screw pin is not suitable for the Wraith platform; when fitting to Wraith models retain the original screws supplied with that kit.
Fitting advice: set correct gear mesh and check backlash after assembly, confirm the pinion is seated firmly on the motor shaft, and use an appropriate RC gear lubricant on the tooth faces. Take care with axial alignment due to the spiral-cut bevel to avoid premature wear.
Suitable for replacing worn bevels or upgrading durability in Axial drivetrains; confirm screw choices for Wraith kits and fine tune mesh for consistent drivetrain behaviour.
Copyright © 2008-2026 rcjaz.co.uk All rights reserved
