Axial SCX10 EXO Wheel Hex Adapter 14mmx9mm - AX010/14X9MM by GPM  [AX010/14X9MM]

Alloy 14x9mm wheel hex for Axial platforms

The AX010/14X9MM is a 4-piece alloy hex adapter set that converts axle wheel interfaces to a 14mmx9mm hex standard for use on Axial EXO, SCX10 and Wraith models. The set is supplied to cover one axle worth of wheel mounting.

These adapters serve as the interface between hubs and wheels, keeping mounting alignment consistent when fitting aftermarket rims or adjusting hub offsets. The alloy construction is suitable for scale crawler applications and trail use.

Fitment advice: confirm the adapter hex fully engages and that each piece seats flush to the hub before tightening. Employ the correct hex driver for wheel fasteners, check for any side-to-side play after a short run, and re-torque hardware as part of routine maintenance. Use threadlocker on wheel screws if that matches your maintenance style.

Tuning note: the low-profile adapters provide a straightforward method to alter wheel placement and track width in small increments, useful when swapping beadlocks or custom wheels to achieve desired clearance or stance on EXO, SCX10 and Wraith chassis.