Axial SCX10 Honcho Front Steering C-Hub Alloy SCX019 by GPM  [SCX019]

Durable alloy front C-hub for SCX10 Honcho

This alloy front C-hub is designed for the Axial Racing SCX10 Honcho and is identified as model SCX019 from GPM. Supplied as a direct replacement, it installs using the vehicle's original front mounting points without altering chassis layout.

Material and role: the unit is manufactured in alloy with cast and machined finishes to provide a stiffer mount for the steering knuckle than common plastic originals and to present a harder wearing contact surface where the axle and kingpin meet the hub.

Installation notes: remove wheel and steering knuckle, transfer the existing kingpin and fasteners where they fit, and verify fit with your steering knuckles and axle shafts. Use the correct hex driver, avoid over-tightening, and check steering clearance and range after fitting. Apply thread locker only where you routinely do for metal fasteners.

Tuning guidance: fitting an alloy hub will change front-end stiffness and steering feel; after installation, re-evaluate toe, caster and linkage geometry and use shims or link length changes to fine-tune the response. Regular inspection of contact faces and fasteners is advised for serious crawling or trail use.