The AW1906H wheel and tyre set is sold as a pair and is intended for 1/10 scale crawlers that accept 1.9" tyres with a 5mm shaft hole and 12mm hex. The CNC-style aluminium rim features a six-pole look and carries a brass pendulum weight that keeps mass biased downward to help the tyre maintain ground contact during high articulation slow-speed crawling.
The included crawler tyre has deep longitudinal tread and a wide footprint to increase slow-speed mechanical grip on rock and technical trails. Source figures list outer tyre diameter 115mm, inner diameter 48.26mm (1.9"), tyre width 40mm, and a nominal weight of 100g per wheel. The wheel accepts standard 12mm hex mounting and is intended for RC tuning use only.
Fitting notes: ensure your axle uses a 5mm shaft and 12mm hex, check hub backspace and clearance, and fit wheels so the brass pendulum weight hangs down for correct operation. The set is supplied as 2 pcs.
This wheel and tyre set is a tuning option where added unsprung mass and deep tread help low-speed traction on technical courses; always confirm fitment before fitting to your vehicle.
Copyright © 2008-2026 rcjaz.co.uk All rights reserved