AXIAL SCX10 II Scale +3mm Hex Hubs SCX2010D+3MM by GPM  [SCX2010D+3MM]

Design overview

Precision aluminum hex hubs made for AXIAL SCX10 II chassis, intended to shift wheels outward by 3mm compared with a 5mm baseline. The hubs mate to the front and rear shaft assemblies to keep steering action smooth while increasing track for more reliable scale handling.

Key functional notes drawn from the product details:

• Track increase: the profile gives an 8mm offset versus the original 5mm, improving lateral stability on rocky or technical sections.
• Strong clamp fit: geometry is shaped to secure the wheel hex and minimise free play under load to aid climbing control.
• Aesthetic detail: the swirled engraving on the outer ring provides a tidy scale finish while maintaining function.

Included items are listed from the product data, use them as supplied to secure the hubs:

• Brake Disk - 2 pcs
• M4x2x12 Stainless Steel Pin - 2 pcs

Installation and tuning role: supplied as an aftermarket option for AXIAL SCX10 II wheel/axle interfaces to change wheel stance and track width. Fitted hubs become the structural mount for wheel loads and a tuning aid for balancing cornering and climbing; ensure your wheel hex and axle interface match before final assembly.