Axial SCX24 Wheel Hex Hub Adapter, Brass, +5mm Offset - JR-SCX2414-BK by Jazrider  [JR-SCX2414-BK]

Axial Racing SCX24 Brass Wheel Hex Hubs Adapter (+5mm Offset)(10g ea.)
Price:
£7.77
Brand:
JAZRIDER
Model:
JR-SCX2414-BK
Condition:
Brand New
Write a review

Overview of the SCX24 Brass Hex Adapter

This hub adapter is designed for the Axial SCX24 and carries the reference JR-SCX2414-BK. Made of brass and indicated at 10g each in the product name, the adapter supplies a fixed +5mm per-wheel offset to alter track width and stance on 1/24 scale crawlers.

The adapter functions as a stance and clearance modifier by moving the wheel mounting point outward; it does not change internal driveline parts. Installing thicker offsets can alter wheel-to-arch clearances and may require changes to hex screw length or wheel inner fitment.

Fitting advice: place the adapter onto the existing wheel hex using the vehicle maker's wheel fastening method, confirm the adapter is concentric when tightened, and spin the wheel to check for rubbing before road testing. Verify screw lengths and bearing positions prior to extended operation.

Is this adapter suitable for all SCX24 wheel types?

It is intended for Axial SCX24 hex interfaces, but confirm the wheel's hex inner diameter and the screw hole pattern match the adapter before purchase.

Will adding +5mm per wheel require chassis changes?

In many cases no chassis modification is needed, but check for new contact points with suspension or bodywork and adjust fastener lengths if required.

How should I verify fit after installing the adapter?

After fitting, verify concentricity, perform a spin test for any binding, and inspect wheel-to-fender clearances at full suspension travel to ensure safe operation.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved