AXIAL SCX6 14T Pinion Gear High Carbon Steel SCX6014TS by GPM  [SCX6014TS]

AXIAL SCX6 JEEP JLU WRANGLER 4WD High Carbon Steel Motor Gear 14T - 2pc set - GPM SCX6014TS
Price:
£5.13
Brand:
GPM
Model:
SCX6014TS
GTIN:
4894538357646
Condition:
Brand New
Write a review
alt="AXIAL SCX6 JEEP JLU WRANGLER 4WD High Carbon Steel Motor Gear 14T - 2pc set - GPM SCX6014TS" title="AXIAL SCX6 JEEP JLU WRANGLER 4WD High Carbon Steel Motor Gear 14T - 2pc set - GPM SCX6014TS"
alt="AXIAL SCX6 JEEP JLU WRANGLER 4WD High Carbon Steel Motor Gear 14T - 2pc set - GPM SCX6014TS" title="AXIAL SCX6 JEEP JLU WRANGLER 4WD High Carbon Steel Motor Gear 14T - 2pc set - GPM SCX6014TS"
alt="AXIAL SCX6 JEEP JLU WRANGLER 4WD High Carbon Steel Motor Gear 14T - 2pc set - GPM SCX6014TS" title="AXIAL SCX6 JEEP JLU WRANGLER 4WD High Carbon Steel Motor Gear 14T - 2pc set - GPM SCX6014TS"
alt="AXIAL SCX6 JEEP JLU WRANGLER 4WD High Carbon Steel Motor Gear 14T - 2pc set - GPM SCX6014TS" title="AXIAL SCX6 JEEP JLU WRANGLER 4WD High Carbon Steel Motor Gear 14T - 2pc set - GPM SCX6014TS"

Overview of the SCX6 motor pinion

This motor pinion is intended for AXIAL SCX6 scale models and mounts directly to the motor shaft to send drive into the drivetrain. Fabricated from high carbon steel, it improves resistance to wear compared with many stock pinions.

Measured specifications provided are 14 teeth, a 5mm centre bore and a 1mm tooth pitch. The supplied items include the pinion and a 4x4 screw shaft to fix the pinion to compatible shafts.

Ideal as a tough, direct-fit replacement on 1/6 scale SCX6 crawler projects where accurate motor-to-gear engagement is needed. For hobby RC use only.

Packing includes

  • Pinion Gear - 1pcs
  • 4*4 Screw Shaft - 1pcs

Original Name / Part No:

ARA310961

Compatible Models

  • 1/6 4WD SCX6 JEEP JLU WRANGLER-AXI05000

How do I check compatibility with my spur gear?

Confirm the 1mm tooth pitch matches your spur gear and verify the 14T tooth count meets your desired final drive ratio before fitting.

Can this pinion handle high torque motors?

Its high carbon steel construction improves wear resistance, but always ensure correct mesh and secure mounting when using higher torque setups.

Is installation difficult for a novice?

Installation is straightforward: set mesh, tighten the provided 4x4 screw shaft, then test on low power to confirm secure fit and correct engagement.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved