Axial SCX6 1/6 Precision Aluminium C-Hubs & Knuckle Carriers - JR-SCX602-TI by Jazrider  [JR-SCX602-TI]

Axial 1/6 SCX6 Jeep Aluminum Steering Knuckle Carriers C-Hubs Set (Titianum)
Price:
£15.01
Brand:
JAZRIDER
Model:
JR-SCX602-TI
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Precision aluminium knuckle carriers for SCX6

This aluminium steering knuckle carrier and C-hub set is intended for 1/6 scale Axial SCX6 Jeep models and is supplied by JAZRIDER as JR-SCX602-TI. It is positioned as an aftermarket upgrade or direct replacement where builders prefer metal steering parts for increased longevity and refined tuning capability.

The kit concentrates on steering pivot areas: C-hubs bolt to the axle housing and the knuckle carriers locate the steering knuckles and wheel hex. Replacing plastic pieces with aluminium changes wear dynamics and provides a firmer, more predictable response when the chassis is under load, aiding toe, caster, and link geometry tuning on a modified SCX6.

Fitting notes: retain OEM hardware if compatible, follow the chassis service routine, and check thread engagement on all screws before final tightening. If reusing seals or bearings, confirm they seat properly in the aluminium bores to prevent any binding or misalignment.

Specifications

  • Item: Axial 1/6 SCX6 Jeep Aluminum Steering Knuckle Carriers C-Hubs Set (Titianum)
  • Material: Aluminum
  • Model Number: JR-SCX602-TI
  • Compatibility: Axial SCX6 Jeep JLU Wrangler 1/6 scale

For model makers upgrading a scale SCX6 crawler, this aluminium knuckle and C-hub set offers a practical improvement for stiffer steering assemblies and easier geometry adjustments; always confirm wheel hex and bearing stack dimensions before final installation.

Can I fit these without modifying the axle housing?

They are made to align with SCX6 axle assemblies and normally fit without housing alterations; perform a trial assembly to confirm the bearing and spacer layout before final assembly.

What torque practice is recommended for aluminium carriers?

Use moderate torque values and medium-strength threadlocker on steel-to-aluminium threads; over-torquing risks stripping aluminium threads or deforming the component.

Will changing to aluminium affect long term wear?

Aluminium typically changes wear patterns compared with plastic, offering improved rigidity but requiring attention to mating bearing and seal fit to avoid accelerated wear in mismatched stacks.

Do these accept standard SCX6 wheel hex sizes?

They are designed around common SCX6 wheel hex dimensions, but you should verify the hex clearance and bearing stack thickness in your build to ensure correct fitment.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved