AXIAL SMT10 Aluminium Front C-Hub & Knuckle Arm 5 Degree Toe MJ019021/5D by GPM  [MJ019021/5D]

Aluminium front C-hub and knuckle arm for AXIAL SMT10

This aluminium front C-hub and knuckle arm set is supplied as a 4pcs RC replacement to change front toe geometry to a 5 degree toe-in. The upgrade is aimed at providing a firmer steering feel and improved turn-in sensitivity on AXIAL SMT10 based models while remaining an aftermarket hobby part.

Fitment and role: a 5 degree toe-in alters initial scrub and steering reaction, which can help drivers make tighter manoeuvres more readily and tune front-end behaviour for technical courses or monster-style driving. These components are intended to replace factory plastic items for maintenance and longevity improvements.

Installation notes: you will need to disassemble the front suspension to swap the C-hubs and knuckles. Check wheel hex alignment and pin seating when reassembling, confirm steering link clearance, and use thread locker on hardware if you expect high-impact use.

Use this 4pcs aluminium set on an AXIAL SMT10 chassis to sharpen front-end response, then adjust toe and steering geometry to suit your setup preferences.