AXIAL SMT10 Lightweight Aluminium Wheel Hex +2mm MJ0104/+2MM by GPM  [MJ0104/+2MM]

AXIAL Racing SMT10 Aluminium Wheel Hex (+2mm) - 4pcs set - GPM MJ0104/+2MM
Price:
£6.58
Brand:
GPM
Model:
MJ0104/+2MM
GTIN:
4894538264470
Condition:
Brand New
Write a review
alt="AXIAL Racing SMT10 Aluminium Wheel Hex (+2mm) - 4pcs set - GPM MJ0104/+2MM" title="AXIAL Racing SMT10 Aluminium Wheel Hex (+2mm) - 4pcs set - GPM MJ0104/+2MM"
alt="AXIAL Racing SMT10 Aluminium Wheel Hex (+2mm) - 4pcs set - GPM MJ0104/+2MM" title="AXIAL Racing SMT10 Aluminium Wheel Hex (+2mm) - 4pcs set - GPM MJ0104/+2MM"
alt="AXIAL Racing SMT10 Aluminium Wheel Hex (+2mm) - 4pcs set - GPM MJ0104/+2MM" title="AXIAL Racing SMT10 Aluminium Wheel Hex (+2mm) - 4pcs set - GPM MJ0104/+2MM"
alt="AXIAL Racing SMT10 Aluminium Wheel Hex (+2mm) - 4pcs set - GPM MJ0104/+2MM" title="AXIAL Racing SMT10 Aluminium Wheel Hex (+2mm) - 4pcs set - GPM MJ0104/+2MM"
alt="AXIAL Racing SMT10 Aluminium Wheel Hex (+2mm) - 4pcs set - GPM MJ0104/+2MM" title="AXIAL Racing SMT10 Aluminium Wheel Hex (+2mm) - 4pcs set - GPM MJ0104/+2MM"
alt="AXIAL Racing SMT10 Aluminium Wheel Hex (+2mm) - 4pcs set - GPM MJ0104/+2MM" title="AXIAL Racing SMT10 Aluminium Wheel Hex (+2mm) - 4pcs set - GPM MJ0104/+2MM"

Lightweight aluminium hex for SMT10 with +2mm offset

Offered as a 4pcs set, this aluminium wheel hex is an aftermarket option for AXIAL Racing SMT10 wheel assemblies that adds a +2mm outboard offset. It is intended to help resolve rubbing or to fine tune stance without replacing wheels or hubs.

Installation mirrors common SMT10 hex replacements: remove wheel and existing hex, fit the aluminium hex onto the axle or hub in the correct orientation, then resecure wheel hardware. After fitting, check clearances throughout suspension travel and make sure drive pins and screws are tightened to prevent movement under load. The component is described as machining-grade aluminium to provide a robust mounting point within the wheel assembly.

The package also contains common hardware to complete installation, included exactly as supplied:

  • 2x10.9 Steel Pin - 4pcs
  • 2x7 Steel Pin - 4pcs
  • 2.5x2.5 Screw Shaft - 8pcs
  • 1.2 Hex Socket Key - 1pc

Will this stop tyre rub on tight builds?

A +2mm shift often clears minor rubbing issues on tight builds or when using wider tyres; verify with the body fitted and at full lock to be sure.

Can I reinstall stock hex later?

Yes, the change is reversible. Keep the original hex and hardware so you can return to stock fitment if required.

Does the kit include everything for fitment?

The kit includes the pins, screw shafts and a 1.2 hex socket key as listed, which cover a standard fitment on SMT10 wheel assemblies.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved